From: owner-hist_text-digest@lists.xmission.com (hist_text-digest) To: hist_text-digest@lists.xmission.com Subject: hist_text-digest V1 #926 Reply-To: hist_text Sender: owner-hist_text-digest@lists.xmission.com Errors-To: owner-hist_text-digest@lists.xmission.com Precedence: bulk hist_text-digest Thursday, January 10 2002 Volume 01 : Number 926 In this issue: -       MtMan-List: Tulle/buffalo gun -       Re: MtMan-List: Tulle/buffalo/Deer all purpose gun -       Re: MtMan-List: Tulle/buffalo/Deer all purpose gun -       Re: MtMan-List: "The Great Buffallo Shoot" -       MtMan-List: CenterMark -       MtMan-List: Rear sights on Tulle -       Re: MtMan-List: CenterMark -       Re: MtMan-List: Rear sights on Tulle -       Re: MtMan-List: Rear sights on Tulle -       Re: MtMan-List: CenterMark -       Re: MtMan-List: Rear sights on Tulle & Center Mark Address -       Re: MtMan-List: Rear sights on Tulle -       Re: MtMan-List: CenterMark -       MtMan-List: The Museum of the Fur Trade Quarterly -       Re: MtMan-List: Rear sights on Tulle -       Re: MtMan-List: Rear sights on Tulle -       Re: MtMan-List: The Museum of the Fur Trade Quarterly -       Re: MtMan-List: The Museum of the Fur Trade Quarterly -       MtMan-List: muzzle loaders virus ---------------------------------------------------------------------- Date: Tue, 8 Jan 2002 12:33:48 EST From: SWcushing@aol.com Subject: MtMan-List: Tulle/buffalo gun Someone asked what kinda gun I shot the buffalo with. I used an old CenterMark Tulle I bought as a kit and put together about 20 years ago. My most favorite smooth bore with no rear site. (onlyest smoothbore, come to think of it...) The charge was 90 grains of 2f, covered with a card and fiber wad, and then a .600 patched round ball. At about 30 yards broadside, I had the option of a head shot (in the ear), the lungs, or heart. I took the heart, and held a bit high so if I missed, I'd at least hit a lung...I didn't miss. The young bull nearly went down at the impact, and only slowly walked about 20 yards before collapsing. Waaaaaugh! Magpie - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Tue, 08 Jan 2002 13:31:40 EST From: CTOAKES@aol.com Subject: Re: MtMan-List: Tulle/buffalo/Deer all purpose gun <> Mine too, I got my Tulle from Center Mark about 2 years (two deer seasons)ago. And both seasons it has put a deer in the freezer both years. I got a mine with a rear sight (which can be documented) due to my poor old eyes. Both deer I put down with 75 grains of 3F at under 50 yards. Paul at Center Mark makes a nice, working hunting gun. I told him I wanted a hunting gun with plain iron fittings and a good strong stock (not all curly pretty) and I got a straight shooting, fast action, handsome tool that makes meat with shot or ball. Y.M.O.S. C.T. Oakes - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Tue, 8 Jan 2002 16:44:10 EST From: WSmith4100@aol.com Subject: Re: MtMan-List: Tulle/buffalo/Deer all purpose gun How, when and/or where does one get a hold of this "Centermark Company"? Do they have a website, or at least a mailing address? Pilgrim questions all, I know. Wade "Sleeps loudly" Smith Boise, Id - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Tue, 8 Jan 2002 16:51:30 EST From: WSmith4100@aol.com Subject: Re: MtMan-List: "The Great Buffallo Shoot" Congrats Magpie. That sure is some pretty country you took it in too. Haven't been up there in about 15 yrs. Brings back fond memories of shining times. Wade "Sleeps loudly" Smith Boise ID - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Tue, 8 Jan 2002 18:15:42 EST From: LivingInThePast@aol.com Subject: MtMan-List: CenterMark Wade, Here's the contact info I got off the MLML web site: CenterMark PO Box 4066 Parnassus Station New Kensington, Pa. 15068 412-335-1319 Replica fusil gun kits As a side note, I too have one of their fusils, Type D with Bayonet (Grenadier) and really enjoy it. Great kit that finishes up into a reliable friend. Barney - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Tue, 8 Jan 2002 21:33:43 EST From: HikingOnThru@cs.com Subject: MtMan-List: Rear sights on Tulle In a message dated 1/8/02 1:33:18 PM Eastern Standard Time, CTOAKES@aol.com writes: << And both seasons it has put a deer in the freezer both years. I got a mine with a rear sight (which can be documented) >> Could you send me that particular document by chance? I'd like to have it for my Tulle. There was a tactical at Ft. Toulouse that has apparently been juried as of now by one or two guys so I will need it if I am to use that gun!!! - -C.Kent - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 9 Jan 2002 03:13:26 EST From: WSmith4100@aol.com Subject: Re: MtMan-List: CenterMark Thanks Barney, I always appreciate the response to my questions by this group. Wade - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 09 Jan 2002 12:38:36 +0000 From: "darlene secondine" Subject: Re: MtMan-List: Rear sights on Tulle C. Kent, There were no rear sights put on Tulle guns at the factory. There is only one existing Tulle French gun that I know of that has a rear sight on it. That Tulle gun has a English Type G rearsight on it. The owner evidently had this installed after it was purchased long after it left the factory at Tulle, France. As long as you put a period sight on your Tulle, it will be authentic to the period, just like a person buying a Tulle 250 yrs. ago may have opted for a rear sight on their gun. There is no evidence that the French Tulle gun ever came from the factory with a rear sight on it, especially English rear sights. Respectfully submitted, Don Secondine >From: HikingOnThru@cs.com >Reply-To: hist_text@lists.xmission.com >To: hist_text@lists.xmission.com >Subject: MtMan-List: Rear sights on Tulle >Date: Tue, 8 Jan 2002 21:33:43 EST > >In a message dated 1/8/02 1:33:18 PM Eastern Standard Time, CTOAKES@aol.com >writes: > ><< And both seasons it has put a deer in the freezer both years. I got a >mine with a rear sight (which can be documented) >> >Could you send me that particular document by chance? I'd like to have it >for my Tulle. >There was a tactical at Ft. Toulouse that has apparently been juried as of >now by one or two guys so I will need it if I am to use that gun!!! > >-C.Kent > >---------------------- >hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 9 Jan 2002 07:54:34 EST From: NaugaMok@aol.com Subject: Re: MtMan-List: Rear sights on Tulle In a message dated 1/8/02 6:35:10 PM Pacific Standard Time, HikingOnThru@cs.com writes: << Could you send me that particular document by chance? I'd like to have it for my Tulle. >> Try Book of Buckskinning IV -- pages 111, 115, & 120 of the article by Charles Hanson. He shows pictures of smooth bores from Holland, France, England, & a "rifle-mounted fusil" by Henry Deringer from about 1812. Those "fly specks" on the rear portion of the barrels where sights are supposed to be are just that -- sights. Also see the French Model 1766 carbine -- item 5 on page 65 of George Neumann & Frank Kravic's "Collector's Illustrated Encyclopedia of the American Revolution". Had this argument before. Seems rear sights on smooth bores wasn't all that uncommon. The Northwest trade gun doesn't seem to have ever been equipped with rear sights, but they show up on fowlers, fusils, & military smooth bores. NM - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 09 Jan 2002 08:35:07 EST From: CTOAKES@aol.com Subject: Re: MtMan-List: CenterMark <> That is an old address, Paul bought the company a few years back and runs it on his farm in Fredonia NY. I do not have the address and number handy but I will get it and post it when I get it this after noon. Y.M.O.S. C.T.Oakes - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 09 Jan 2002 08:50:55 EST From: CTOAKES@aol.com Subject: Re: MtMan-List: Rear sights on Tulle & Center Mark Address If your persona is strict military and you are serving in a French Military unit you would not have a Tulle issued to you from his majisties armory with a rear sight. All of the existing Tulles and Fowlers that have rear sights were converted military to civilian (I'm civilian Ranger Militia) or in the case of the quote unquote "American Fowler" were built for civilians. So in a strict interpretation my Tulle is no longer a Military Tulle, it was 'captured in the early part of the war and converted to my civilian needs, the barrel was shortened due to damage caused to the muzzle by one of those stupid french plug bayonents, and I needed to hunt meat for my family so I had the gun smith also add the rear sight to improve hunting". At least that is the persona of my favorite gun named #10.If you need at least one and you can not get to the Smithsonian collection, Neumann's book Battle Weapoans of the American Revolution shows smoothbores and fowlers with rear sights. Mine looks a lot like page 162. By the way here is the info for CenterMark Inc., P.O. Box 575, Fredonia NY 14063, 716-679-0276, Owner is Paul and I will misspell his last name but it is phonetically "See Burt". Paul is great to deal with and as he is a working farmer this is the time of year when he has time to work on your gun. Y.M.O.S. C.T. Oakes < In a message dated 1/8/02 1:33:18 PM Eastern Standard Time, CTOAKES@aol.com > writes: > > << And both seasons it has put a deer in the freezer both years. I got a > mine with a rear sight (which can be documented) >> > Could you send me that particular document by chance? I'd like to have it > for my Tulle. > There was a tactical at Ft. Toulouse that has apparently been juried as of > now by one or two guys so I will need it if I am to use that gun!!! > > -C.Kent > > ---------------------- > hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 9 Jan 2002 06:54:07 -0700 From: "BARRY CONNER" Subject: Re: MtMan-List: Rear sights on Tulle > > << Could you send me that particular document by chance? I'd like to have it > for my Tulle. >> > > Try Book of Buckskinning IV -- pages 111, 115, & 120 of the article by > Charles Hanson. He shows pictures of smooth bores from Holland, France, > England, & a "rifle-mounted fusil" by Henry Deringer from about 1812. Those > "fly specks" on the rear portion of the barrels where sights are supposed to > be are just that -- sights. Also see the French Model 1766 carbine -- item 5 > on page 65 of George Neumann & Frank Kravic's "Collector's Illustrated > Encyclopedia of the American Revolution". Had this argument before. Seems > rear sights on smooth bores wasn't all that uncommon. The Northwest trade > gun doesn't seem to have ever been equipped with rear sights, but they show > up on fowlers, fusils, & military smooth bores. > > NM > Factory installed rear sights are very uncommon, I worked with Charley Hanson on an article on "Trade Guns", "Northwest Guns", "Farmer Guns" (Tryon's name for the same), looked at many government contracts and supply lists that he had at hand, only found a few that requested rear sights (special order by a factor usually) but on Wilson Chief's guns they appeared more than any other manufacturer - Charley never figured that one out ! A large percentage of the guns at the Museum of the Fur Trade and what Curly G. and a few others have with rear sights where added after being delivered. I have three original trade guns, one is an early style sight that is soldered on the barrel flat, while another is just a tab of metal turned up from the barrel flat with a small notch filed in for sighting, the third is with no sight, all after market rear sights. I have seen originals with "fly speck" rear sight that where no more than center punch marks lined up side by side, Hanson told me these marks where probably added by a blacksmith, was it at the factory or at the settlement after delivery ? When I go to collector, gun or antique gun shows I'm always looking for this type weapon, usually the ones one will find have had poor repair work or in such bad shape that I pass on buying them. This thing about rear sights has been going on for 50 years and will probably never be settled. It's no different than the "copper tin lined canteen" issue that one of the National group's said wasn't available until the Civil War - I contacted a Dr. V.L.Bigsby at Valley Forge Historical Society in PA and he furnished photos of pieces of one found at that sight. So what we think is correct today can change with good research and good documentation tomorrow. Right now I'm trying to come to terms with a gentleman on a Wilson Chief's gun that is about NRA 85%, untouched with a factory installed rear sight that is approx. 3/16 " in height, shallow sight notch, sweated onto the barrel (no dovetailed notch like folks today do), uncut 42" barrel, another example of a rear factory sight, and according to the documentation on this gun - it was ordered with this sight (special order again). Buck. - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Thu, 10 Jan 2002 01:47:48 EST From: WSmith4100@aol.com Subject: Re: MtMan-List: CenterMark Thanks C.T., Once again, I appreciate the help. Wade - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Thu, 10 Jan 2002 04:56:24 -0600 From: "Paul W Jones" Subject: MtMan-List: The Museum of the Fur Trade Quarterly This is a multi-part message in MIME format. - ------=_NextPart_000_007C_01C19993.27535720 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear Members, I finally dug out the remainder of my Museum Fur Trade Quarterlies.=20 Included are 49 volumes, with 4 being combined issues. All are original = issues save and except those marked with an **, which are musuem = produced xerox copies. I will offer the entire lot for $120.00, including postage. If I do not = receive a buyer for that price by January 18 at 12:00 noon, I will then = offer the collection on E-Bay. =20 Thank you for your consideration. =20 What remains available is as follows: Volume 1, 1965 (combined issues 1 through 4) Volume 2, Spring 1966, #1 (this volume is a xerox furnished by the = museum, and any other issues that are also copies will be marked with an = "**." Volume 2, Summer 1966, #2, ** Volume 2, Winter, 1966, #4 Volume 3, Spring 1967 (combined issues 1 through 4) Volume 10, Winter 1974, #4, ** Volume 11, Spring 1975, #1, ** Volume 11, Summer 1975, #2, ** Volume 11, Fall 1975, #3, ** Volume 11, Winter 1975, #4, ** Volume 12, Spring 1976, #1, ** Volume 12, Summer 1976, #2, ** Volume 12, Fall 1976, #3, ** Volume 12, Winter 1976, #4, ** Volume 13, Spring 1977, #1 Volume 13, Summer 1977, #2 Volume 13, Winter 1977, #4 Volume 19, Summer 1983, #2 Volume 19, Fall 1983, #3 Volume 19, Winter 1983, #4 Volume 21, Spring 1985, #1 Volume 21, Fall 1985, #3 Volume 21, Winter 1985, #4 Volume 22, Fall 1986, #3 Volume22, Winter 1986, #4 Volume 23, Spring 1987, #1 Volume 23, Summer 1987, #2 Volume 23, Fall 1987, #3 Volume 24, Summer 1988, #2 Volume 24, Fall 1988, #3 Volume 24, Winter 1988, #4 Volume 25, Spring 1989, #1 Volume 25, Summer 1989, #2 Volume 25, Fall 1989, #3 Volume 25, Winter 1989, #4 Volume 26, Spring 1990, #1 Volume 26, Summer 1990, #2 Volume 26, Fall 1990, #3 Volume26, Winter 1990, #4 Volume 27, Combined issues, Spring and Summer 1991, #1 & #2 Volume 27, Winter 1991, #4 Volume 28, Combined issues, Summer and Fall 1992, #2 & #3 Volume 28, Winter 1992, #4 Volume 29, Spring 1993, #1 Volume 29, Summer 1993, #2 Volume 33, Winter 1997, #4 Volume 34, Spring 1998, #1 Volume 34, Fall 1998, #3 Volume 35, Winter 1999, #4 Regards, Paul - ------=_NextPart_000_007C_01C19993.27535720 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Dear Members,
 
I finally dug out the remainder of my Museum = Fur Trade=20 Quarterlies. 
 
Included are 49 volumes, with 4 being = combined=20 issues.  All are original issues save and except those marked with=20 an **, which are musuem produced xerox = copies.
 
I will offer the entire lot for=20 $120.00, including postage.  If I do not receive a buyer for = that=20 price by January 18 at 12:00 noon, I will then offer the collection on=20 E-Bay. 
 
Thank you for your consideration. =20
 
What remains available is as=20 follows:
 
Volume 1, 1965 (combined issues 1 through=20 4)
 
Volume 2, Spring 1966, #1  (this volume = is a=20 xerox furnished by the museum, and any other issues that are also copies = will be=20 marked with an "**."
Volume 2, Summer 1966, #2, = **
Volume 2, Winter, 1966, = #4
 
Volume 3, Spring 1967 (combined issues 1 = through=20 4)
 
Volume 10, Winter 1974, #4, = **
 
Volume 11, Spring 1975, #1, = **
Volume 11, Summer 1975, #2, = **
Volume 11, Fall 1975, #3, = **
Volume 11, Winter 1975, #4, = **
 
Volume 12, Spring 1976, #1, = **
Volume 12, Summer 1976, #2, = **
Volume 12, Fall 1976, #3, = **
Volume 12, Winter 1976, #4, = **
 
Volume 13, Spring 1977, = #1
Volume 13, Summer 1977, = #2
Volume 13, Winter 1977, = #4
 
Volume 19, Summer 1983, = #2
Volume 19, Fall 1983, = #3
Volume 19, Winter 1983, = #4
 
Volume 21, Spring 1985, = #1
Volume 21, Fall 1985, = #3
Volume 21, Winter 1985, = #4
 
Volume 22, Fall 1986, = #3
Volume22, Winter 1986, = #4
 
Volume 23, Spring 1987, = #1
Volume 23, Summer 1987, = #2
Volume 23, Fall 1987, = #3
 
Volume 24, Summer 1988, = #2
Volume 24, Fall 1988, = #3
Volume 24, Winter 1988, = #4
 
Volume 25, Spring 1989, = #1
Volume 25, Summer 1989, = #2
Volume 25, Fall 1989, = #3
Volume 25, Winter 1989, = #4
 
Volume 26, Spring 1990, = #1
Volume 26, Summer 1990, = #2
Volume 26, Fall 1990, = #3
Volume26, Winter 1990, = #4
 
Volume 27, Combined issues, Spring and = Summer 1991, #1=20 & #2
Volume 27, Winter 1991, = #4
 
Volume 28, Combined issues, Summer and Fall = 1992, #2=20 & #3
Volume 28, Winter 1992, = #4
 
Volume 29, Spring 1993, = #1
Volume 29, Summer 1993, = #2
 
Volume 33, Winter 1997, = #4
 
Volume 34, Spring 1998, = #1
Volume 34, Fall 1998, = #3
 
Volume 35, Winter 1999, = #4
 
Regards,
 
Paul
 
 
 
- ------=_NextPart_000_007C_01C19993.27535720-- - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 9 Jan 2002 10:18:33 -0500 From: hawknest4@juno.com Subject: Re: MtMan-List: Rear sights on Tulle buck and all--- if you need a rear sight setup for a smoothbore---you might look at danny caywoods rear sight it is made to soulder on the barrel with soft soulder and is easily installed---he has them in brass and in steel and also the front sights which are a matching set---believe the rear cost about $7.50 and the front $5.00 takes about 30 min to install with a propane torch and some soulder and tinning solution----dont have to get the barrel real hot if you use soft soulder and they stay good---the rear is drift-able for windage---its a pretty low profile sight ---this sight was copied from a original wilson gun is what danny says---??????---cant verify that---his dad has the original wilson danny told me--- I have used his sights several times and have a couple of them here in the shop---if any of you guys need one believe i have both steel and brass ones--- even have installed a set on a cannon barrel pistol i built with a long barrel---call it my hand held rifle it has a 18' barrel on it---shot a deer with it and killed it about 3 or 4 years ago---its 50 cal and shoots 55 gr of FFFg with a patched round ball and will keep your ball in a 50 yd big bull really consistant if you use 2 hands to shoot it or rest it on your knees while sitting it is flint of late english styleing "HAWK" Michael Pierce "Home of ".Old Grizz" Product line " trademark (C) & "The Arkansas Underhammers" 854 Glenfield Dr. Palm Harbor florida 34684 Phone Number: 1-727-771-1815 E-Mail: hawknest4@juno.com Web site: http://www.angelfire.com/fl2/mpierce ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Thu, 10 Jan 2002 07:41:07 -0700 From: "BARRY CONNER" Subject: Re: MtMan-List: Rear sights on Tulle - ----- Original Message ----- From: To: Sent: Wednesday, January 09, 2002 8:18 AM Subject: Re: MtMan-List: Rear sights on Tulle > buck and all--- > if you need a rear sight setup for a smoothbore---you might look at danny > caywoods rear sight it is made to soulder on the barrel with soft soulder > and is easily installed---he has them in brass and in steel and also the > front sights which are a matching set---believe the rear cost about $7.50 > and the front $5.00 takes about 30 min to install with a propane torch > and some soulder and tinning solution----dont have to get the barrel real > hot if you use soft soulder and they stay good---the rear is drift-able > for windage---its a pretty low profile sight ---this sight was copied > from a original wilson gun is what danny says---??????---cant verify > that---his dad has the original wilson danny told me--- > "HAWK" > Michael Pierce "Home of ".Old Grizz" Product line " trademark (C) > > ________________________________________________________________ Hawk, This is a good example of what could have been used by either the local gunsmith or blacksmith, I own two of Caywoods guns and one has the sight your talking about. Danny is really nice to deal with and always upbeat, talk to him at least once a month - he's a good man and makes a great product. Buck. - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Wed, 9 Jan 2002 21:16:28 -0700 From: Joe Brandl Subject: Re: MtMan-List: The Museum of the Fur Trade Quarterly - --============_-1201486304==_ma============ Content-Type: text/plain; charset="us-ascii" ; format="flowed" Paul. I will send a check monday, need your addess Joe - -- Have a look at our web site @ www.absarokawesterndesign.com Call us about our tanning, furs & leather and lodgepole furniture 307-455-2440 New leather wildlife coasters and placemats - ther're great!! - --============_-1201486304==_ma============ Content-Type: text/html; charset="us-ascii" Re: MtMan-List: The Museum of the Fur Trade Quarterly
Paul.
I will send a check monday, need your addess

Joe
--
Have a look at our web site @ www.absarokawesterndesign.com
Call us about our tanning, furs & leather and lodgepole furniture 307-455-2440
New leather wildlife coasters and placemats - ther're great!!
- --============_-1201486304==_ma============-- - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Thu, 10 Jan 2002 10:27:02 -0600 From: "Paul W Jones" Subject: Re: MtMan-List: The Museum of the Fur Trade Quarterly This is a multi-part message in MIME format. - ------=_NextPart_000_002C_01C199C1.57D99660 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Re: MtMan-List: The Museum of the Fur Trade QuarterlyHey Joe,=20 It pays to be quick. Yours was the first of 11 messages asking to = purchase the volumes. Get me your address and I will package them and mail out either Saturday = or Monday. Your credit is good with me. Will also enclose our new Clark and Sons wholesale catalogue for = dealers. If you have one for your furs, etc., please include it with = your check. Regards, Paul W. Jones 4609 Waycross Houston, TX 77035 ----- Original Message -----=20 From: Joe Brandl=20 To: hist_text@lists.xmission.com=20 Sent: Wednesday, January 09, 2002 10:16 PM Subject: Re: MtMan-List: The Museum of the Fur Trade Quarterly Paul. I will send a check monday, need your addess Joe --=20 Have a look at our web site @ www.absarokawesterndesign.com Call us about our tanning, furs & leather and lodgepole furniture = 307-455-2440 New leather wildlife coasters and placemats - ther're great!! - ------=_NextPart_000_002C_01C199C1.57D99660 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Re: MtMan-List: The Museum of the Fur Trade = Quarterly
Hey Joe,
 
It pays to be quick.  Yours was the = first of 11=20 messages asking to purchase the volumes.
 
Get me your address and I will package them = and mail=20 out either Saturday or Monday.  Your credit is good with=20 me.
 
Will also enclose our new Clark and Sons = wholesale=20 catalogue for dealers.  If you have one for your furs, etc., please = include=20 it with your check.
 
Regards,
 
Paul W. Jones
4609 Waycross
Houston, TX 77035
 
 
 
 
----- Original Message -----
From:=20 Joe = Brandl=20
To: hist_text@lists.xmission.com =
Sent: Wednesday, January 09, = 2002 10:16=20 PM
Subject: Re: MtMan-List: The = Museum of=20 the Fur Trade Quarterly

Paul.
I will send a check monday, need your=20 addess

Joe
--
Have a look at our web site @ www.absarokawesterndesign.c= om
Call=20 us about our tanning, furs & leather and lodgepole furniture=20 307-455-2440
New leather wildlife coasters and placemats - ther're=20 great!!
- ------=_NextPart_000_002C_01C199C1.57D99660-- - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ Date: Thu, 10 Jan 2002 14:30:14 -0600 From: "Frank Fusco" Subject: MtMan-List: muzzle loaders virus This is about a virus that I heard is going around. The symptoms are as follows. 1. You start with a run down feeling and a lack of motivation. 2. Head ache and stiffness of the joints. 3. Fever and chills 4.You can't get along with the other half or even your friends. 5.Scream at the kids or grandkids and even kick the dog. This virus usually strikes about this time of year. THERE IS NO KNOWN CURE The only short-term remedy is to go out and buy a new muzzleloader and get out to the range and shoot. On the other hand maybe this is not so terrible after all May be we should send it to Washington D. C. and see what happens. [sent to me by a member of my little list] Worth a yuk or two. :-) Frank Frank G. Fusco Mountain Home, Arkansas http://clubs.yahoo.com/clubs/ozarksmuzzleloaders - ---------------------- hist_text list info: http://www.xmission.com/~drudy/mtman/maillist.html ------------------------------ End of hist_text-digest V1 #926 ******************************* - To unsubscribe to hist_text-digest, send an email to "majordomo@xmission.com" with "unsubscribe hist_text-digest" in the body of the message.