From darkskiez@penguinpowered.com Thu Aug 03 18:55:55 2000
Received: from [212.49.224.20] (helo=smtp.screaming.net)
	by lists.xmission.com with esmtp (Exim 2.12 #2)
	id 13KVmA-0001tl-00
	for lirc@lists.xmission.com; Thu, 3 Aug 2000 18:55:50 -0600
Received: from penguinpowered.com (IDENT:mhb@dyn171-ras5.screaming.net [212.49.228.171])
	by smtp.screaming.net (8.9.3/8.9.3) with ESMTP id AAA01333
	for <lirc@lists.xmission.com>; Fri, 4 Aug 2000 00:58:15 GMT
Sender: mhb@smtp.screaming.net
Message-ID: <398A14F2.5B2D2D18@penguinpowered.com>
Date: Fri, 04 Aug 2000 01:57:22 +0100
From: Mark Bryars <darkskiez@penguinpowered.com>
X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.16 i586)
X-Accept-Language: en-GB,en-US
MIME-Version: 1.0
To: lirc@lists.xmission.com
Subject: Pinnacle Systems Problems
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


I bought a pinnacle sys remote today but i cant get it working :/
I'm using 2.2.16 and tried 0.6.1 and the CVS version

I get 
WARNING: timeout reading byte 1 [or 2]
every time I press a button on the control :/

I was looking at the code and saw that it sets the serial port to 1200
baud,
but my /proc/tty/driver/serial file shows
0: uart:16550A port:3F8 irq:4 baud:9600 tx:5 rx:622 brk:287 RTS|CTS

i tried changing the referenced to 9600 baud in hw_pinsys.c but no
effect :/

Any tips/tricks/suggestions?
What system configurations have people got this working?
Or the PixelView, coz its based on that driver.

Regards
 Mark